1、高抗冲、高耐热、阻燃、增强、透明等级别。

2、综合性能较好,冲击强度较高,化学稳定性,电性能良好。

3、用于制作一般机械零件,减磨耐磨零件,传动零件和电讯零件。

4、流动性比HIPS差一点，比PMMA、PC等好，柔韧性好。

经销日本UMG ABS VW800 成型性能：

1、熔融温度高，粘度高，对剪切作用不敏感，对大于200克的塑件，应采用螺杆式注射机，喷嘴应加热，宜用开畅式延伸式喷嘴，注塑速度中高速。

2、无定形材料,流动性中等,吸湿大,必须充分干燥,表面要求光泽的塑件须长时间预热干燥80-90度,3小时。

3、如需解决夹水纹，需提高材料的流动性，采取高料温、高模温，或者改变入水位等方法。

4、冷却速度快，模具浇注系统应以粗，短为原则，宜设冷料穴，浇口宜取大，如：直接浇口，圆盘浇口或扇形浇口等，但应防止内应力增大，必要时可采用调整式浇口。模具宜加热，应选用耐磨钢。

5、模温对塑件质量影响很大，模温低时收缩率，伸长率，抗冲击强度大，抗弯，抗压，抗张强度低。模温超过120度时，塑件冷却慢，易变形粘模，脱模困难，成型周期长。

6、料温对塑件质量影响较大，料温过低会造成缺料，表面无光泽，银丝紊乱料温过高易溢边，出现银丝暗条，塑件变色起泡。

7、成型收缩率小，易发生熔融开裂，产生应力集中，故成型时应严格控制成型条件，成型后塑件宜退火处理。

8、宜取高料温,高模温,但料温过高易分解(分解温度为>270度).对精度较高的塑件,模温宜取50-60度,对高光泽.耐热塑件,模温宜取60-80度。

经销日本UMG ABS VW800 的不同应用加工温度；

经销日本UMG ABS VW800主要应用领域范围；

ABS树脂的最大应用领域是汽车、电子电器和建材。汽车领域的使用包括汽车仪表板、车身外板、内装饰板、方向盘、隔音板、通风管等很多部件。在电器方面则广泛应用于电冰箱、电视机、洗衣机、空调器、计算机、复印机等电子电器中。建材方面，ABS管材、ABS卫生洁具、ABS装饰板广泛应用于建材工业。此外ABS还广泛的应用于包装、家具、体育和娱乐用品、机械等工业。

ABS树脂广泛应用于汽车工业.电器仪表工业和机械工业中,常作齿轮,汽车配件,挡泥板,扶手,冰箱内衬,叶片,轴承,把手,管道,接头,仪表壳,仪表板,盆安全帽等:在家用电器和家用电子设备的应用前景更广阔,如电视机,收录机,,洗衣机,空调机,吸尘器和各种小家电器材:日用品有鞋,包,各种旅游箱,办公设备,玩具及各种容器等,低发泡的ABS能代替木材,适合作建材,家具。

Today as well each individual has to discover his own answer to these same questions. You cannot find out whether there is a God or whether there is life after death by looking in an encyclopedia. Nor does the encyclopedia tell us how we ought to live. However, reading what other people have believed can help us formulate our own view of life.

The two made thirty passes at each other. The swordman in blue couldn't oppose the weight of his opponent's sword. He kept retreating. All the other liveried swordman began to show hope on their faces as they anticipated their side to win at last.

Then the tall swordman made a great cry like the sound of a thunderclap and made a horizontal cut with his great sword. The swordman in blue couldn't avoid it. He could only block it with his own sword with all his strength. Clang! The two swords met. The great sword broke and half of the blade flew away. The swordman in blue wielded⁴¹ a far sharper sword. Then the