DNT系列摇臂式台面点焊机
DNT Series Table Spot Welding Machine

整机特性：
1、 焊接电源可做成交流点焊或中频逆变直流点焊两种，可根据不同的焊接材料选型；
2、 下电极为水平平台式：焊接范围大，焊后工件平整、不易变形，焊点下面光滑无痕；
3、 上电极为多关节摇臂式，焊接方便，不用移动工件，只移动焊枪即可在整个台面内焊接任何地方；
4、 同时焊接平台可在200mm范围内任意升降，方便不同形状和高度产品焊接；
5、 机器操作杆可做成垂直焊接或杠杆加压焊接两种，可对不同的工件选用不同的形式，操作方便，更安全可靠。

主要技术参数：
额定功率：50KVA-200KVA
额定电压：220V/380V-420V（任选）频率：50Hz/60Hz
气源气压：≥0.5Mpa;
电极压力：≥2.2KN；
台面尺寸：800×1000mm（可定制）；
台面高度：750-950mm（200mm自动升降）；
焊枪形式：水平式/垂直式（任选一种或两种）；焊枪总长：395mm（可配垂直式焊枪）；


Main Feathers and Applications
1. There are two types of Welding Power Source : AC Spot Welding or Medium Frequency inverter DC spot welding;
2. The lower welding electrode is designed level flat table:Welding range increased,the welded workpiece stays very flat,not deformed,no mark and smooth under welding point;
3. The up welding electrode is designed as Multi-joint arm, welding easily, without moving work piece, only move the welding gun, can weld any position in the range of the down flat table;
4. At the same time in the 200mm range the lower welding flat table can go up and down freely, by this way it is suitable for welding various shape and size of products;
5. Welding Gun can be made in two types: Vertical Welding or Horizontal Welding,choosed according to different workpiece,More easily operating and freely, safe and reliable.

Main Technical Parameters:
Rated Capacity: 50KVA~200KVA, 
Input Voltage:220V/380V~480VAC(Optional), 50Hz/60Hz
Air Source Pressure: =0.5Mpa;
Electrode Force: =2.2KN
Welding Table Size:800mm(W) ×1000mm(L);
Welding Table Height: 750~950mm (200mm Stroke);
Welding Gun Type: Horizontal Gun or Vertical Gun (Optional);
Welding Gun Length: 395mm;
Machine Size : L:1580mm×W:1000mm×H:1900mm;
Machine Weight: 850kg