汾阳市6/4D-AH细沙机渣浆泵参考

3，液下泵关闭出口管路阀门及压力表。4，液下泵起动电想法，以压力表指示敞开出口阀门到需要位置。5，液下泵正常泊车，该关闭出口阀门，然后间断电想法，关闭压力表。6，液下泵轴承室应包管满足的油脂，轴承温升不得高于70℃。三 液下泵的设备需要1，锅炉给水泵泵必需笔直设备在液料池或水槽上面的固定支架上。2，液下泵泵的吸进口距离池底部应大于200㎜。3，液下泵泵的出口管路必需另设支架，不容许将其重量直接落在泵体上。?。

汾阳市6/4D-AH细沙机渣浆泵参考渣浆泵运行中，要注意填料压盖部位的温度和渗漏。正常的填料渗漏应不超过每分钟10-20滴。huiquanjdzj

Shaft seal(seal): The shaft seal type of the pump has packing seal, cover impeller seal, mechanical seal.
Transmission: There are V-type triangular belt transmission, elastic coupling transmission, gear gearbox transmission, hydraulic coupling transmission, frequency conversion drive device, Silicon controllable speed adjustment and so on. Among them, the V-type triangular belt drive has CL, CV, CR, ZL, ZV, and ZR transmissions.
Overall performance: wide range of pump performance, cavitation performance, high efficiency. Multistage tandem technology can be used for long-distance transportation. There are a variety of metals available for the flow parts and the depth is increased. With various speeds and variations, the pump is operated under good engineering. Long service life, high operating efficiency, can be many kinds of poor transportation conditions.

汾阳市6/4D-AH细沙机渣浆泵参考轴承组件：泵的轴承组件采用圆筒式结构，便于叶轮与前护板的间隙，时可整体拆出。轴承采用油脂。