济南变形缝厂家所生产变形缝装置系列产品适用各种规格的伸缩缝、沉降缝、防震缝，已被全国各地设计院、建筑及施工企业等单位广泛采用，公司深入研制出目前国内最新型的建筑变形缝装置。按照安装位置分四个类型：楼地面变形缝；内墙、吊顶变形缝；外墙变形缝；屋面变形缝。按照变形缝两侧结构特点分为两种型号：平面型、转角型。按照变形缝装置结构特征分为六种类型：金属盖板型；金属卡锁型；双列嵌平型；单列嵌平型；抗震型；承重型。适应缝宽为50-50Omm也可根据建筑的需要特别设计。
济南变形缝厂家发货， 

济南变形缝产品性能及技术参数：

 一、质量保证

1、济南变形缝产品质量控制达到ISO9001国际质量认证标准

2、济南变形缝产品的生产，供应，和安装完全符合建筑设计的要求。

3、所以所有济南变形缝产品均有质控部分3道检验，并有质控负责人盖章

二、运输，存储和操作条件

2.1.济南变形缝厂家确保产品在制造商原有的未启封的纸箱或者木装箱内，以良好的条件运送到指定地点。箱上标注名字和制造商的品牌，工程证明，运输和操作说明。

2.2.济南变形缝产品放在整洁的，干燥的，严禁被雨水淋做

安装条件1、济南变形缝厂家安装程序，有必要的情况下，检查目前墙面或者其它建筑的情况，通过精确的区域测量确保工作必须符合要求。在最后的商店图纸上显示记录的测量数据并根据施工进度，协调生产以免延误工期。

2、维护和保证，济南变形缝厂家保证变形缝质量，济南变形缝产品符合国家要求，所生产的建筑变形缝产品严格把关，济南变形缝价格由济南变形缝厂家提供，报价为济南变形缝出厂价。

3、济南变形缝制造商保证服从有限保修中的所有条款和条件。具体为，在运输期后一年内，安装，维修，和符合产品说明使用产品，出现产品质量问题，产品免费。

4.1济南鼎伦变形缝材料要求

4.1.1所使用的材料必须满足，以下提到的要求

1）结构型钢材-ASTM A 36

2)钢板-ASTM A 283 C 级

3）冷轧钢板地面用扣板-ASTM A786

4）铝合金-ASTM B221,合金6063-T5 挤压；ASTM B209,合金6061 T6，薄板或盖板

5）黄铜-UNS 合金C26000 针对于半硬的薄板或胶原

6）不锈钢-ASTM A 167,304型，不特别说明的情况下适用于盖板，薄板和条状型材。

7）挤压成型的胶条—单独的或者多层次的橡胶挤压品例如ASTM D2000 下的分类，有或没有连续的，纵向的，内部旋转的，和适合兼容的构架的，标明颜色的，或者如果没有标明，以雇主代表从供应商的标准颜色中选择的为准。

8)外部的胶条——代表性的，两个单独的分层柔性挤压，一个内部的pvc和一个外部的防水热塑橡胶8000系列，热塑的橡胶，例如，ASTM D2000系列的，一个兼容的构架的，标明颜色的，如果没有标明颜色，以雇主代表从供应商的标准颜色中选择的为准

Jinan deformation seam manufacturer produces deformation seam device series product is suitable for various specifications of expansion joints and settlement joints, shockproof seam, has been all over the country design institute, widely used in architecture and construction enterprises and other units, the company further developed the building deformation cracks and is the latest device. According to the installation location in four types: building ground deformation cracks; Interior wall, ceiling deformation cracks; Exterior wall deformation cracks; Seam roof deformation. According to the deformation seam on both sides of the structure is divided into two types: flat type, Angle type. According to the deformation of joint device structure is divided into six types: metal plate type; Metal card lock type; Double row embedded flat; Embedded single flat; Resistant; Bearing heavy. To adapt to the slit width of 50 to 50 omm can also be designed according to the needs of building special.

Jinan deformation joint factory shipment,

Jinan deformation joint product performance and technical parameters:

A, quality assurance

1, jinan deformation joint product quality control achieved ISO9001 international quality certification standards

2, jinan deformation joint production, supply, and install completely accords with the requirements of architectural design.

3 jinan deformation cracks, so all products are quality part 3 inspection procedures, and quality control, head of the seal

Second, the transportation, storage and operating conditions

2.1. Jinan manufacturer to ensure that products in the manufacturers original deformed joints not unsealed cartons or wooden packing, transported to the designated places in good conditions. Box labeled with brand name and manufacturer, engineering, transportation and instructions.

2.2. Jinan deformation joint products on clean, dry, the rain is strictly prohibited

Installation conditions 1, jinan deformation joint factory installation program, it is necessary, check the metope or other buildings, through accurate area measurement to ensure that the work must meet the requirements. Displayed on the final shop drawings to record the measurement data and according to the construction progress, coordinate production in order to avoid delay the construction period.

2, maintenance and guarantee, jinan deformation seam manufacturer to ensure the quality of deformation cracks, deformation cracks of jinan products meet the national requirements, the production of building deformation seam products strictly, deformation cracks of jinan deformation seam price by manufacturers to provide, quotation for jinan deformation seam ex-factory price.

3, jinan deformation joint manufacturers guarantee subject to all terms and conditions of the limited warranty. Specific for, within one year after the transportation period, installation, maintenance, and in line with the instructions to use product, the product quality problems, the product free.

4.1 jinan ding seam deformation material requirements

4.4.1 the materials used must meet the following mention requirements

1) structural steel - ASTM A 36

2) steel plate - ASTM A 283 C level

3) cold rolled plate surface with gusset plate - ASTM A786

4) aluminum alloy - ASTM B221, alloy 6063 - T5 extrusion; ASTM B209, alloy 6061 T6, sheet or plate

5) C26000 brass - UNS alloy for half hard sheet or collagen

6) stainless steel - ASTM A 167304 type, without special instructions applicable to cover plate, sheet and strip profile.

7) extrusion strip - single or multiple layers of rubber extrusion products such as the classification under the ASTM D2000, with or without continuous, longitudinal, internal rotation, and is suitable for compatible architecture, indicate the color, or if there is no marked, with the employer representatives from selected in the supplier's standard color shall prevail.

8) outside of the strip, representative, two separate layers flexible extrusion, an internal waterproof thermoplastic PVC and an external rubber 8000 series, thermoplastic rubber, ASTM D2000 series, for example, a compatible architecture, indicate the color, if not indicate the color, of the standard color for the employer representatives from supplier shall prevail

济南变形缝楼地面承重型变形缝样品：

联系方式：0533 3071310

手机：15895222603

QQ：1074690720 

微信：linxianshuai88

林先生