AM 895F Front panel

AO801 Analog output 1x8 ch,

AO810 Analog output 1x8 ch,

AO820 Analog Output 4x1 ch,

AO845 Analog Output. Redundant or single

AO890 Analog Output 1x8 ch with Intrinsi

AO895 Analog Output 1x8 ch with Intrinsi

AOHOIS200HD01,HARD DRIVE REPLACEMENT

AOSOIS403030C1E1,SERIES 40 SOFTRE UPGRAD

AV1210000,POSTTTION

AV2320210,POSTTTION

AV3321210,POSTTTION

BBPR01-1

BBPR01-2

BBPR01-3

BBPR01-5

CI810B AF100 Field Comm. Interface

CI820V1 S800 Redundant FCI

CI830 Profibus Communication Interface

CI840 Engineering Kit

CMM11,CONDITION MONITORING MODULE

CMMTU02,CONDITION MONITORING MODULE TERM

CTT02,CONFIGURATION TURNING TERMINAL

CTT12,

CTU05R,ANALOGUE O/P REDUNDANCY

CTU11R,FIELD BUS SLAVE I/F REDUNDANT

DAI01, Analog input as of V 3

DAI02,ANALOG INPUT MODULE

DAI03, Analog input as of V 3

DAI04, Analog input as of V 3

DAI05, Analog input as of V 3

DAO01, Analog output as of V 3

DCO01,Communication module

DLM01

DCP02

DCP10, CPU module

RDI01

RDO01

RAI01

RAO01

DDI01, Digital input as of V 3

DDI02

DDI04, Digital input as of V 3.2

DDI05, Digital input as of V 5.1

DDO01, Digital output as of V 3

DDO02, Digital output as of V 3

DDO04

DFI01, Frequency input as of V 3.3

DI801 Digital Input 24V d.c.

DI802 Digital Input 120V a.c./d.c., 8x1c

DI803 Digital Input 230V a.c./d.c., 8x1c

DI810 Digital Input 24V d.c. 2x8 ch.

DI811 2x8 ch 48V Digital input

DI814 Digital Input 24V d.c. Current Sou

DI820 Digital Input, 120 V a.c.

DI821 Digital Input 230V a.c.

DI830 Digital Input 24V d.c. SOE

DI831 Digital Input 48V d.c.,SOE

DI840 Digital Input. Redundant or single

DI885 Digital Input 24/48V d.c.,SOE

DI890 Digital Input 8x1 ch with Intrinsi

DLM02, Link module as of V 3

DO801 Digital Output 16ch. 24V d.c. 0.5A

DO802 Digital Output, Relay. Normal open

DO810 Digital Output 24 V d.c.

DO814 Digital Output current sinking

DO815 Digital Output 24V d.c

DO820 Digital Output, Relay. Normal open

DO821 Digital Output, Relay. Normal clos

DO840 Digital Output. Redundant or singl

DO890 Digital Output 4x1 ch with Intrins

DP820 Pulse Counter RS-422, Current, 5V

DP840 Pulse Counter or Frequency Measure

DPW01

DPW02, Power supply

DPW03, Power supply

DRA02, Rack with 10 module slots

EI801F Ethernet module 10Base2真空断路器VS12035R 真空断路器VS12040R 真空断路器VS17005R 真空断路器VS15102R真空断路器VS30025 真空断路器VS30029额定电压50/60Hz(40.5 kV)额定电流(2500A)额定短路开断电流,对称的(31.5 kA)最大直流分量(40%)额定短路关合电流(80 kA)额定峰值耐受电流(80kA)额定短时耐受电流, 4s(31.5kA)产品特点先进而可靠的工艺（确保真空密闭）、100%进口原材料（铜镍合金50触点材料具有抗磨损性能）、使用期长的金属膜盒――确保真空断续器运行时间高达30000小时。真空触点不受表面杂质或污染物的影响。除此之外，由于经过特殊处理，触点具有优异的表面品质和良好的导电性能。所有这些特性使断续器内部电阻较低，范围为8至15μΩ。因此，在断续器长期运行过程中，温度不易升高。卓越的设计、100%进口原材料和先进的工艺使部件表面清洁而平滑，可达到较高的介电强度，并符合IEC和GB标准。由于引进独特的钎焊工艺，可实现可靠的钎焊连接。而且，焊缝不易老化磨损。与采用常规工艺进行钎焊的断续器相比，采用该工艺钎焊的断续器，其泄露率可大大降低。因此，可确保真空断续器在整个使用期内具有较高的真空密闭性。