1、遂道系统专用
2、建筑照明、路灯、高层坚井线连接
3、高层建筑坚井电缆户外架空线、电缆沟工厂动力供电主缆
1. Streetlight system
2. Architectural lighting, streetlight and high-rise shaft line connection
3. High-rise shaft cable, outdoor overhead line, troughing, main cable for factory power supply
① 首先剥去电缆外护套皮
外护套皮剥去的长度应小于电缆盒内腔的有效长度。
First, peel off the outer sheath of cable
Peeled length of outer sheath should be smaller than the effective length of inner
chamber of cable box.
订货号Order no .110733
② 不需剥去的电缆的绝缘皮,接头完全绝缘;不需截断主电缆,可在电缆任意位置做分支。
It is unnecessary to peel off the insulating sheath of cable, the joint is fully insulated; it is unnecessary to cut off the main cable, we can make branch at any position of cable.
③ 按照下列步骤安装绝缘穿刺线夹
Install the insulation piercing connector according to the following procedures
1.将断面整齐的支线插入分支器盖套
Insert branch line into the casing cover of connector
2.将分支器固定于主干线连接处,然后用力拧紧力矩螺母
Fix clamp on the joint of main line,then twist firmly by hand.
3. 用六角套筒扳手垂直拧紧力矩螺母至螺帽断开为止
Vertically twist moment screw to break screw cap with hexagonal set spanner.
4. 继续用力旋紧螺母直到顶端断裂脱落
Vertically twist moment screw to break screw cap with hexagonal set spanner.